| Customization: | Available |
|---|---|
| Heating Mode: | Transmission |
| Material Status: | Powder |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
small scale lab spray dryer machine
Product description:
The small spray dryer is suitable for the production of micro-particle powder in universities, research institutes and food and pharmaceutical chemical enterprises. It has wide applicability to all solutions such as emulsions and suspensions. It is suitable for the drying of heat sensitive materials such as biological products. Biological pesticides, enzyme preparations, etc. Since the ejected material is subjected to high temperature and is instantaneously heated only when sprayed into a mist, these active materials maintain their active ingredients after drying.
Specifically used in the following areas: beverages and pigments, milk and egg products, plant and vegetable extracts, pharmaceutical synthesis, heat sensitive materials, plastic polymers and resin fragrances, blood products, ceramics and superconducting biochemicals, dyes, soaps and detergents, food additives, oxide bone powder. And tooth powder and so on.
Features:
Original imported nozzles with high efficiency.
Color large touch screen operation, automatic control and manual control, Chinese and English panel, parameter LCD display.
Real-time regulation of PID constant temperature control technology, accurate temperature control, heating temperature control accuracy ± 1 ° C.
The spray, drying and collecting device is made of transparent high-quality high-temperature borosilicate glass, and the whole process of spray drying can be seen.
The atomization structure of the two-fluid spray is made of high-precision 316 stainless steel material. The diameter of the powder spray is normally distributed and the fluidity is good.
The jet is automatically unblocked (through the needle) and the frequency is adjustable. When the nozzle is blocked, it will be automatically cleared to ensure the continuity of the experiment.
The feed amount can be adjusted by the feed peristaltic pump.
Special protection function, the fan does not start, the heater can not start.
Built-in imported oil-free air compressor, the noise is less than 50db.
Equipped with air inlet filter to ensure the sample is pure.
After drying, the granularity is uniform, and more than 95% of the dry powder is in the same granularity.
Technical Parameters:
1 Inlet air temperature control: 30 ~ 300 ° C
2. Outlet temperature control: 30 ~ 150 ° C
3. Evaporation water volume: 1500mL / H ~ 2000ml / h
4. Maximum feed amount: 2000mL/H
5. Minimum feed: 50mL
6. Feeding mode: peristaltic pump adjustment
7. Average drying time: 1.0~1.5S
8. Electric heater power: 3KW AC220V single phase grounding
9. Fan: 0.2KW Maximum air volume 5.6m3/min Maximum wind pressure 1020Pa
10. Air compressor: 0.2KW maximum gas production 4.2 m3/h
11. Compressed air working pressure: 2 ~ 3Bar
12. Equipment dimensions: 1200mm (height) × 650mm (length) × 500mm (width)
13. Nozzle diameter: 1.00mm
14. Equipment weight: 125KG
Small spray dryer configuration
1, atomizer; 2, large clamp; 3, tail gas pipe; 4, lock nut; 5, cyclone separator; 6, 1 clamp; 7, collection bottle;
8, large clamp; 9, peristaltic pump; 10, drying room; 11, touch screen; 12, 2 clamp; 13, power switch;
14, feeding tube; 15, 3 clamp; 16, collecting tube
Componets:
|
No |
Name |
Quantity |
|
1 |
glass drying room |
1 pc |
|
2 |
glass cyclone separator |
1 pc |
|
3 |
glass sample collection bottle |
1 pc |
|
4 |
glass sample collection tube |
1 pc |
|
5 |
feeding silicone tube 6mm |
2 meters |
|
6 |
Spray chamber |
1 pc |
|
7 |
Clamp (LY12 black) |
1 pc |
){kind=link}